Guide

As-Built Drawings vs. Original Plans: What Is the Difference?

By As-Built Company · 4 min read · Updated

People often use "blueprints," "plans," and "as-builts" to mean the same thing. They are not the same, and the difference matters when you are about to spend money on a building.

Here is the simple version:

  • Original plans (often called blueprints) show what someone intended to build.
  • As-built drawings show what is actually there today.
12ORIGINAL PLANSwhat was designedAS-BUILTwhat is there today1 door added2 closet built
Same house, two drawings. The as-built shows what changed.

Why the two do not match

Changes during construction

Buildings are rarely built exactly as drawn. A pipe is in the way, so a wall shifts a few inches. The owner asks for a bigger closet. A window size is out of stock, so a different one goes in. These changes are made on site, and the drawings are usually not updated.

Changes over the years

After a building is finished, it keeps changing. A kitchen is remodeled. A room is added. A garage becomes a bedroom. New heating and cooling equipment goes in. Each change moves the building a little further from the original plans.

THE BUILDING KEEPS CHANGING. THE OLD PLANS DO NOT.gap between the plans and the building1987builtplans drawn1996kitchenremodeled2008roomadded2019new heatingand coolingTODAYas-builtmeasuredexample timeline
Every change widens the gap between the old plans and the real building.

Missing or partial plans

For many older buildings, the original plans are lost, or only a few pages survive. Sometimes the only plan on file is a small sketch from a real estate listing, which is not accurate enough to build from.

Side by side

Original plansAs-built drawings
What they showWhat was designedWhat is there today
When they are madeBefore constructionAny time after, by measuring the building
Based onThe designer's intentReal measurements
Include later changesNoYes
Safe to design and order fromOnly after checkingYes

Which one do you need?

If you are changing the building in any way, you need to know what is there now. That means as-builts.

Original plans are still worth keeping. They often show things you cannot see, such as how the structure was framed or where pipes were meant to run. The best case is to have both: the old plans for background, and current as-builts for real sizes.

A quick test for your old plans

Pick three things you can check with a tape measure: the length of one room, the width of one door, and the distance from a window to a corner. If any of them is off by more than an inch from the plans, do not design or order materials from those plans.

One more term: "record drawings"

On large construction projects, the contractor marks up the plans during the job to show what changed. Those are sometimes called as-builts or record drawings. They are only as good as the notes that were kept, and they stop being correct the first time the building is changed afterward.

When we say as-built drawings, we mean drawings made by measuring the building as it stands today.

The short version

Original plans tell you what was supposed to be built. As-built drawings tell you what is really there. For any project that changes a building, start with what is really there. New to all of this? Read What Are As-Built Drawings? or get an instant quote.


Have a project where this applies?

Get a Quote →
☎ Call Get a Quote →